在可降解顆粒的加工過程中，一些企業增加了制造機械的滾動敏感應用功能，有效地提高了塑料顆粒加工的質量和功率?？山到忸w粒的加工工藝主要涉及塑料顆粒的分類限制包裝膜的機械清洗和清洗應用三個方面。下面小編為您講解。

In the processing of degradable particles, some enterprises have increased the rolling sensitive application function of manufacturing machinery, effectively improving the quality and power of plastic particle processing. The processing technology of degradable particles mainly involves the classification of plastic particles and the mechanical cleaning and cleaning application of packaging film. The following section explains it for you.

一：為了控制滾動顆粒包裝的大應用領域，可降解顆粒起到了清潔的作用，增加了對嚴格的塑料蓋進行分類清洗的相對較高的制造成本，防止了再生顆粒的粉塵污染控制的出現。

1： In order to control the large application field of rolling particle packaging, degradable particles play a cleaning role, increase the relatively high manufacturing cost of classified cleaning of strict plastic covers, and prevent the emergence of dust pollution control of recycled particles.

二：壓力下的機械攪拌過程可以避免高沖突強度的情況。通過對塑料動態分異中不同清洗程序的清洗過程進行過濾，有效地加入堿洗可減少塑料顆粒的干燥和破碎。

2： Mechanical mixing under pressure can avoid high conflict intensity. The drying and crushing of plastic particles can be reduced by filtering the cleaning process of different cleaning procedures in plastic dynamic differentiation and effectively adding alkali washing.

三：按照控制塑料顆粒的成本處理程序，增加機械生產沖突也會增加沖擊強度，造成機械磨損，從而控制堿性清洗機的高滾動功率。

3： According to the cost control procedure for plastic particles, increasing the mechanical production conflict will also increase the impact strength, causing mechanical wear, thus controlling the high rolling power of the alkaline cleaner.

可降解塑料配方原理分析：

Principle analysis of degradable plastic formula:

降解過程主要涉及生物降解，光降解和化學降解，這三種主要降解過程相互間具有增效、協同和連貫作用。例如，光降解與氧化物降解常同時進行并互相促進；生物降解更易發生在光降解過程之后。

The degradation process mainly involves biodegradation, photodegradation and chemical degradation, and these three main degradation processes have synergistic, synergistic and coherent effects. For example, photodegradation and oxide degradation often go on at the same time and promote each other; Biodegradation is more likely to occur after the photodegradation process.

以上三種處理方法是可降解顆粒處理的主要用途。為了提高塑料顆粒的加工質量，要求廠家嚴格按照標準要求控制每一道工序。根據可持續發展戰略的原則，做好塑料球的加工不僅可以保護我們的生存環境，而且可以很好地利用廢棄物資源。關注我們http://www.qylxschool.cn給您帶來更多相關內容！

The above three treatment methods are the main uses of degradable particles. In order to improve the processing quality of plastic particles, the manufacturer is required to control each process in strict accordance with the standard requirements. According to the principle of sustainable development strategy, the processing of plastic balls can not only protect our living environment, but also make good use of waste resources. Follow us http://www.qylxschool.cn Bring you more relevant content!